Deutsch
English
Français
Walterscheid® Quick-disconnect yoke QSG 2300 - 1365798
KNP1 3/8-6 QS-B L125 KPL
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Original Walterscheid spare part
Product advantages
The Walterscheid QS lock is a further development of the well-known pull lock. It is available for all building sites. Since the QS fork can be pre-centered on the PTO with the last lock, you have both hands free to push it on. It snaps into place and is clearly audible.
Product advantages
The Walterscheid QS lock is a further development of the well-known pull lock. It is available for all building sites. Since the QS fork can be pre-centered on the PTO with the last lock, you have both hands free to push it on. It snaps into place and is clearly audible.
The scope of delivery includes 1x Connecting yoke for series W, E (Ecoline) and P (PowerDrive).
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type
- QSG
- Size
- 2300
- B (mm)
- 84
- Manufacturer
- Walterscheid
- d (mm)
- 27
- A-Profile
- 1 ⅜“ (6)
- L (mm)
- 125
- Drawing
- 21.83.00
