Walterscheid® Coupling Plate KuP389-45/30 – 8005685

Product number: 8005685

KuP389-45/30 W=389/30/20 mm-160/HD=140x80/M20

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

The coupling plate is a height adjustable sliding plate, which can be used exclusive in towing frames with guide rails. She is prepared for the attachment of flange couplings or other connecting devices with flange. The range of application extends to the use on agricultural or forestry vehicles, self-propelled work machines or trailers.

Product advantages

Adjustable
Forged material
Usable for big range of couplings type flange

The scope of delivery includes 1x coupling plate KuP389-45/30 with single homologation.

The support distance (S) from the center of the coupling point to the rear site of the coupling plate may be up to 222 mm.

Instructions for certificates: Installation of coupling parts must be checked and approved by an recognized expert
according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.