Walterscheid® Coupling clevis type IN5410/329/33/ZB335 - 8004288

Product number: 8004288

IN5410 W=329/33/23 mm

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

This product is a non-automatic trailer coupling. With regard to the jaw dimensions and the area of use, it complies with DIN 11028, RREG 2009/144/EC, VO (EU) 2015/208, UN ECE R147 and class c40. In normal position is the coupling in closed and locked position. In this version it has a cylindrical pin D=31 mm and can be privoted through 360°. The torque required for this purpose being 100 to 150 Nm. The trailer coupling is only offered as a height-adjustable inner part and can only be operated in quickly height adjustable towing frames. The range of application extends to the use on agricultural or forestry vehicles, self-propelled work machines or trailers.

Product advantages

Made of forged steel
The scope of delivery includes 1x coupling clevis type IN5410/329/33/ZB335 and 1x fixing pin ZB335L30KPL (order number: 8004048).
Suitable for towing eyes according to DIN 11026 (ISO 5692-2)/ DIN 11043/ DIN 74054 (ISO 8755)/ DIN 74053 (ISO 1102)/ DIN 9678 (ISO 5692-1) and „Schweizer Zugöse“
German Approval No.: F 4220 | Approval No.: e1*89/173*0026

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Type of connection
non automatic, coupling pin cylindrical
Vertical load (daN)
W=329/33/23 mm
D-Value (kN)
DIN 11026 (ISO 5692-2) | DIN 11043 | DIN 74053 (ISO 1102) | DIN 74054 (ISO 8755) | DIN 9678 (ISO 5692-1) | ISO 20019 | Schweizer Zugöse
German approval no.
e1 0026
AP Code
A (mm)
B (mm)
C (mm)
D (mm)
Data sheet

ass: 13 sim: 0 croo: 0