Walterscheid® Coupling Ball Type KT8730

Product number: 8004474

W=965/36,6 mm Cat.3

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

The ball coupling D=80 mm dimensions of the ball crossbeam and field of application complying with ISO 24347, VO (EU) 2015/208 and regulation UN ECE R147, class a80. In its normal state, the device is in coupled and locked position. The ball cross beam can only be operated in the lower link hooks of 3-point linkages.

Product advantages

The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.

The scope of delivery includes 1x coupling ball type KT8730.

Only for connection to ball-type trailer shanks 80 according to ISO 24347

Suitable hooks category 3 (order number: 200020) or category 4 (order number: 309746) must be ordered as well.
The ball D=80 mm can be replaced (by authorized workshops) up to 2 times.

Connection of any transportation trailers forbidden. Only for connecting with ball-type trailer shanks ISO 24347. Please watch carefully the operating instructions!

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.

Model: KT8730
Type of connection: modular | Ball 80
Vertical load (daN): 3000
Norm DIN/ISO: ISO 24347
AP Code: N-PAV-B-CG1-MP-NH-0
A (mm): 1010
B (mm): 36,6
AP-Code: N-PAV-B-CG1-MP-NH-0
Data sheet: 2.06.020
Colour: Black