Walterscheid® Insert of Drawbar KBa8332

Product number: 8002639

KK80 3/75/1025/37/290/0/118/55 mm


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Discontinued Model. Limited availability. Successor product: 8005497
The scope of delivery includes 1x Insert of drawbar KBa8332 with single homologation.
Suitable for connection to ball-type trailer shanks 80 according to ISO 24347.
The ball D=80 mm can be replaced (by authorized workshops) up to 2 times.
Instructions for certificates: Installation of coupling parts must be checked and approved by an recognized expert
according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Model
KBa8332
Type of connection
modular | Ball 80
Vertical load (daN)
4000
D-Value (kN)
89,3
Norm DIN/ISO
ISO 24347
Single homologation
Single homologation
Approval
Single homologation
A (mm)
1025
B (mm)
290
C (mm)
55
D (mm)
37
E1 (mm)
25,5
F1 (mm)
175
F2 (mm)
75
F3 (mm)
303,5
AP-Code
N-TP-B-CG1-VZW1-GE-SH-0/37
G1 (mm)
118,5
Data sheet
2.05.230
Colour
Black

ass: 27 sim: 0 croo: 0