Walterscheid® Coupling Clevis Type Flange KU602NB35 – 8002462

Product number: 8002462

KU602 HD=140x80/17 mm-35x170 mm


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Towing couplings are only used for towing inoperable vehicles and in exceptional cases for manoeuvring purposes. The couplings largely correspond to DIN 74056. Furthermore it has a cylindrical pin D=35 mm. Use for trailer operation is not permitted. The couplings are usually rigidly attached to the front end of the vehicle in the middle. They can also be attached to the rear end of the vehicle, but not for use as a trailer. Towing couplings do not require type approvals, but all Walterscheid types have been horizontally statically tested by RWTÜV in accordance with Directive 77/389/EC. The couplings are not intended to accept vertical loads.


Product advantages

Forged model
The scope of delivery includes 1x coupling clevis type flange KU602NB35.
Suitable for towing eyes according to DIN 74053 (ISO 1102), DIN 74054 (ISO 8755), VG74059.
Approved according to 77-389 / EEC
The tow hitches do not require type approval, but all types were from RWTÜV according to directive 77/389 / EG horizontal
statically checked. The clutch is not for inclusion provided by support loads.
The couplings largely correspond to DIN 74056.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Type of connection
non automatic, coupling pin cylindrical
Model
KU602NB35
max. pulling load (t)
25
Flange dimension
HD=140x80/17 mm
Norm DIN/ISO
DIN 74056
A (mm)
140
B (mm)
80
C (mm)
200
D (mm)
140
E (mm)
17
F (mm)
170
G (mm)
35
AP-Code
N-F-SAH-G-RC0-NH-0
Data sheet
1.03.020
Colour
Black

ass: 14 sim: 0 croo: 0
Product number: BG-PB90107820-2