Walterscheid® Power Steering System ZWL50W15KU-KBA-AS – 8004539

Product number: 8004539

W=250 mm 3xHD50 mmx21 mm R/L


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Discontinued Model. Limited availability. Successor product: 8005409
Power steering system ZWL50 according to ISO 26402.

The presence of fixing points for the power steering adapter is provided on site. The selection of themouning screws (quality 10.9) and the spacers must be made according to the selected power steering component. Furthermore, the appropriate forced power steering components depend on the position of the steering rod on the device.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Type of connection
Ball 50
Model
ZWL50W15KU-KBA-AS
Norm DIN/ISO
ISO 26402
A (mm)
60
AP-Code
N-SAH-B-CG1-NH-0
Data sheet
6.02.010
Colour
Cr6-free passivated

ass: 23 sim: 0 croo: 0