Walterscheid® Mounting Plate ANP50-4/1-2 – 8000583

Product number: 8000583

180x170x20 mm/HD=140x80/17 mm-2xHD90M16


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


The mounting plates type ANP50 are attached to coupling plates (KuP) ABG-No. M 10036 or approval e1*2009/144*0480 and can be mounted in quick height-adjustable towing frames. They are suitable for the attachment of ball couplings with bracket of class A50-1 or A50-X. The range of application extends to the use on agricultural or forestry vehicles.


Product advantages

For various mounting positions
The scope of delivery includes 1x mounting plate ANP50-4/1-2.
The design of additional mounting plates are possible on request.
Approval No.: e1*2009/144*2013/8*0636

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Model
ANP50-4/1-2
Type of connection
modular | flange
Flange dimension
HD=140x80/17 mm
Vertical load (daN)
200
D-Value (kN)
20
Approval
e1 0636
A (mm)
170
B (mm)
180
C (mm)
140
D (mm)
80
E (mm)
90
F (mm)
95
G (mm)
M16
AP-Code
OP-SAH-EH-0/KK50
Data sheet
7.09.040
Colour
Black

ass: 3 sim: 0 croo: 0