Walterscheid® Special Tool MW-WAL – 8004971

Product number: 8004971

M48x15 1/2 D=65x35 mm


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


The tool is used to secure the lock nut below the KK80 ball. It is operated by means of a ½" torque wrench. The locknut must be secured by loctite. Tightening torque of the locknut 160-180 Nm. The mounting tool is to fix the ball 80 at Walterscheid ball products.
The scope of delivery includes 1x Special tool MW-WAL.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.







Model
MW-WAL
AP-Code
OP-0
Data sheet
8.09.015
Colour
Without color

ass: 0 sim: 0 croo: 0