Walterscheid GmbH | PTO Driveshafts complete

← Previous
1
2
3
Next →

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2580 - 1113180

Specification

Type: WWZ
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 365725
Item no. attachment WH-I: 365725
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
SNR cone WH-I: 129929
Length of guard tube (outer): 730
Protective colour: Yellow
Cone Type WH-A: WW80
Outer profile length: 795
Attachment type of profile: AA
Length of guard tube (inner): 725
Inner profile length: 800
Cross seal: STANDARD
Abbreviation attachment WH-A: DOPG
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113180
More information

The listing of this OEM article is for the purpose of identification only. It is not intended as a spare part until further notice!

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2580 - 1113174

Specification

Type: WWZ
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 136961
Item no. attachment WH-I: 136961
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8H
Form attachment WH-I: KP1 3/8H
Protective colour: Yellow
Inner profile length: 800
Length of guard tube (inner): 725
Nipple form / position I/A: LL LL
Length of guard tube (outer): 730
Outer profile length: 795
SNR cone WH-I: 129929
Attachment type of profile: AA
Cone Type WH-A: WW80
Cross seal: STANDARD
Abbreviation attachment WH-A: QSG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113174
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2580 - 1113173

Specification

Type: WWZ
Size: 2580
Shaft length (Lz): 860
Item no. attachment WH-A: 136961
Item no. attachment WH-I: 136961
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8H
Form attachment WH-I: KP1 3/8H
Protective colour: Yellow
Cone Type WH-A: WW80
Attachment type of profile: AA
Outer profile length: 445
Length of guard tube (inner): 380
Nipple form / position I/A: LL LL
Inner profile length: 460
SNR cone WH-I: 129929
Length of guard tube (outer): 380
Cross seal: STANDARD
Abbreviation attachment WH-A: QSG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25

Product number: 1113173
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113179

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 365722
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Protective colour: Yellow
Cone Type WH-A: WW80
Chain: K
Length of guard tube (inner): 795
SNR cone WH-I: 129928
Length of guard tube (outer): 795
Outer profile length: 860
Inner profile length: 880
Cross seal: STANDARD
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25Z

Product number: 1113179
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113178

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 365722
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Length of guard tube (outer): 795
Chain: K
SNR cone WH-I: 129928
Inner profile length: 880
Cone Type WH-A: WW80
Length of guard tube (inner): 795
Outer profile length: 860
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113178
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113172

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 341579
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (outer): 795
Length of guard tube (inner): 795
Chain: K
Outer profile length: 860
Inner profile length: 880
SNR cone WH-I: 129928
Cone Type WH-A: WW80
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25Z

Product number: 1113172
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113171

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 341579
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Outer profile length: 510
Chain: K
SNR cone WH-I: 129928
Cone Type WH-A: WW80
Length of guard tube (inner): 445
Inner profile length: 525
Protective colour: Yellow
Length of guard tube (outer): 445
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25

Product number: 1113171
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113170

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 341579
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Chain: K
Length of guard tube (inner): 795
Protective colour: Yellow
Cone Type WH-A: WW80
SNR cone WH-I: 129928
Outer profile length: 860
Inner profile length: 880
Length of guard tube (outer): 795
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113170
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2480 - 1113169

Specification

Type: WWZ
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 341579
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: WW80
Protective colour: Yellow
Inner profile length: 525
Outer profile length: 510
Length of guard tube (outer): 445
Length of guard tube (inner): 445
SNR cone WH-I: 129928
Chain: K
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25

Product number: 1113169
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113177

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 384517
Item no. attachment WH-I: 384517
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain: K
Outer profile length: 865
Inner profile length: 880
Length of guard tube (inner): 790
Cone type WH-I: WW80
Attachment type of profile: AA
Protective colour: Yellow
SNR cone WH-A: 134401
Cone Type WH-A: WW80
Length of guard tube (outer): 790
SNR cone WH-I: 134401
Cross seal: STANDARD
Abbreviation attachment WH-A: DOPG
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113177
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113176

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 384517
Item no. attachment WH-I: 384517
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Inner profile length: 895
SNR cone WH-A: 134400
Length of guard tube (inner): 635
Cone Type WH-A: WW80
Cone type WH-I: WW80
Protective colour: Yellow
Outer profile length: 885
SNR cone WH-I: 134400
Attachment type of profile: AA
Length of guard tube (outer): 830
Chain: K
Cross seal: STANDARD
Abbreviation attachment WH-A: DOPG
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113176
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113168

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 366838
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone type WH-I: WW80
SNR cone WH-I: 134401
Attachment type of profile: AA
Length of guard tube (inner): 790
Length of guard tube (outer): 790
Inner profile length: 880
Nipple form / position I/A: LL LL
SNR cone WH-A: 134401
Outer profile length: 865
Cone Type WH-A: WW80
Chain: K
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113168
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113167

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 366838
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (inner): 440
SNR cone WH-I: 134401
Inner profile length: 540
Cone type WH-I: WW80
Cone Type WH-A: WW80
Chain: K
Attachment type of profile: AA
Nipple form / position I/A: LL LL
Outer profile length: 515
SNR cone WH-A: 134401
Length of guard tube (outer): 440
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25

Product number: 1113167
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113166

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 366838
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 895
Length of guard tube (outer): 830
Length of guard tube (inner): 635
Protective colour: Yellow
SNR cone WH-A: 134400
SNR cone WH-I: 134400
Cone type WH-I: WW80
Outer profile length: 885
Nipple form / position I/A: LL LL
Attachment type of profile: AA
Chain: K
Cone Type WH-A: WW80
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113166
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2380 - 1113165

Specification

Type: WWZ
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 366838
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (inner): 480
Chain: K
SNR cone WH-I: 134400
SNR cone WH-A: 134400
Nipple form / position I/A: LL LL
Outer profile length: 535
Inner profile length: 540
Length of guard tube (outer): 480
Attachment type of profile: AA
Cone Type WH-A: WW80
Cone type WH-I: WW80
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 1G
Profile tube - inner type: 0VGA
Guard type: SDF15

Product number: 1113165
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2280 - 1113175

Specification

Type: WWZ
Size: 2280
Shaft length (Lz): 1210
Item no. attachment WH-I: 607006
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Length of guard tube (outer): 865
Cone type WH-I: WW80
Cone Type WH-A: WW80
Chain WH-I: K
Nipple form / position I/A: -Z -Z
SNR cone WH-A: 134399
Length of guard tube (inner): 670
Inner profile length: 935
Chain WH-A: K
Attachment type of profile: AA
Outer profile length: 920
SNR cone WH-I: 134399
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113175
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2280 - 1113164

Specification

Type: WWZ
Size: 2280
Shaft length (Lz): 1210
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Cone Type WH-A: WW80
Protective colour: Yellow
Length of guard tube (inner): 670
Outer profile length: 920
Attachment type of profile: AA
Chain WH-A: K
Inner profile length: 935
SNR cone WH-I: 134399
Chain WH-I: K
Cone type WH-I: WW80
Length of guard tube (outer): 865
SNR cone WH-A: 134399
Nipple form / position I/A: LL LL
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113164
More information

Walterscheid® PTO Driveshaft with wide angle joint on both sides WWZ 2280 - 1113163

Specification

Type: WWZ
Size: 2280
Shaft length (Lz): 860
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
SNR cone WH-A: 134399
SNR cone WH-I: 134399
Length of guard tube (inner): 520
Nipple form / position I/A: LL LL
Chain WH-A: K
Cone Type WH-A: WW80
Chain WH-I: K
Length of guard tube (outer): 520
Attachment type of profile: AA
Inner profile length: 580
Cone type WH-I: WW80
Outer profile length: 570
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1G
Profile tube - inner type: 0VGA
Guard type: SDF15

Product number: 1113163
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113427

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 195097
Item no. attachment WH-I: 600494
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/4
Form attachment WH-I: ZP1 3/4
SNR cone WH-I: 129929
Nipple form / position I/A: LL LB
Protective colour: Yellow
Length of guard tube (outer): 845
Outer profile length: 920
Length of guard tube (inner): 845
Attachment type of profile: AA
Inner profile length: 940
Cone Type WH-A: RP7
Cross seal: STANDARD
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113427
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113426

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 195097
Item no. attachment WH-I: 600470
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/4
Form attachment WH-I: ZP1 3/8
Outer profile length: 920
Length of guard tube (outer): 845
Protective colour: Yellow
Inner profile length: 940
Nipple form / position I/A: LL LB
Length of guard tube (inner): 845
Cone Type WH-A: RP7
Attachment type of profile: AA
SNR cone WH-I: 129929
Cross seal: STANDARD
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113426
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113425

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 195097
Item no. attachment WH-I: 600468
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/4
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP7
Outer profile length: 920
Nipple form / position I/A: LL LB
Inner profile length: 940
SNR cone WH-I: 129929
Length of guard tube (inner): 845
Attachment type of profile: AA
Protective colour: Yellow
Length of guard tube (outer): 845
Cross seal: STANDARD
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113425
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113162

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 365725
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Outer profile length: 920
SNR cone WH-I: 129929
Inner profile length: 940
Protective colour: Yellow
Length of guard tube (inner): 845
Length of guard tube (outer): 845
Attachment type of profile: AA
Cone Type WH-A: RP7
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113162
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113161

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 860
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 365725
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Length of guard tube (inner): 500
Cone Type WH-A: RP7
Inner profile length: 580
SNR cone WH-I: 129929
Attachment type of profile: AA
Length of guard tube (outer): 500
Protective colour: Yellow
Outer profile length: 570
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25

Product number: 1113161
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113153

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 1210
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 136961
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8H
Protective colour: Yellow
Length of guard tube (inner): 845
Length of guard tube (outer): 845
Attachment type of profile: AA
Cone Type WH-A: RP7
Outer profile length: 920
SNR cone WH-I: 129929
Inner profile length: 940
Nipple form / position I/A: LL LB
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25Z

Product number: 1113153
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2580 - 1113152

Specification

Type: WWE
Size: 2580
Shaft length (Lz): 860
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 136961
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8H
Cone Type WH-A: RP7
Attachment type of profile: AA
Nipple form / position I/A: LL LB
Inner profile length: 580
Protective colour: Yellow
Length of guard tube (inner): 500
SNR cone WH-I: 129929
Length of guard tube (outer): 500
Outer profile length: 570
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4GA
Guard type: SDF25

Product number: 1113152
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1800099

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 135299
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (outer): 540
Chain: K
Outer profile length: 610
Length of guard tube (inner): 535
Cone Type WH-A: RP6
Inner profile length: 630
Protective colour: Yellow
SNR cone WH-I: 129928
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: STF25Z

Product number: 1800099
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1800098

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 135299
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
Chain: K
Inner profile length: 980
Length of guard tube (outer): 890
SNR cone WH-I: 129928
Cone Type WH-A: RP6
Outer profile length: 960
Length of guard tube (inner): 690
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: STF25Z

Product number: 1800098
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1800097

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 135299
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP6
Inner profile length: 630
Protective colour: Yellow
Chain: K
Length of guard tube (inner): 535
Length of guard tube (outer): 540
Outer profile length: 610
SNR cone WH-I: 129928
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: STF25

Product number: 1800097
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113160

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Cone Type WH-A: RP6
Inner profile length: 980
SNR cone WH-I: 129928
Outer profile length: 960
Chain: K
Length of guard tube (inner): 690
Length of guard tube (outer): 890
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25Z

Product number: 1113160
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113159

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Cone Type WH-A: RP6
Length of guard tube (outer): 545
Protective colour: Yellow
Outer profile length: 615
Chain: K
Inner profile length: 620
Length of guard tube (inner): 540
SNR cone WH-I: 129928
Cross seal: STANDARD
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25

Product number: 1113159
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113158

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Outer profile length: 960
Length of guard tube (outer): 890
Cone Type WH-A: RP6
SNR cone WH-I: 129928
Protective colour: Yellow
Length of guard tube (inner): 690
Inner profile length: 980
Chain: K
Cross seal: STANDARD
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113158
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113157

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 365722
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Protective colour: Yellow
Outer profile length: 610
Inner profile length: 630
Cone Type WH-A: RP6
Chain: K
Length of guard tube (inner): 535
Length of guard tube (outer): 540
SNR cone WH-I: 129928
Cross seal: STANDARD
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25

Product number: 1113157
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113151

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 980
Length of guard tube (inner): 690
Protective colour: Yellow
Length of guard tube (outer): 890
Cone Type WH-A: RP6
Outer profile length: 960
Chain: K
SNR cone WH-I: 129928
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25Z

Product number: 1113151
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113150

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Outer profile length: 615
Length of guard tube (inner): 540
Protective colour: Yellow
Cone Type WH-A: RP6
Length of guard tube (outer): 545
Chain: K
SNR cone WH-I: 129928
Inner profile length: 620
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: S5
Profile tube - inner type: S4LGA
Guard type: SDF25

Product number: 1113150
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113149

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 1210
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-I: 129928
Outer profile length: 960
Inner profile length: 980
Protective colour: Yellow
Length of guard tube (outer): 890
Chain: K
Cone Type WH-A: RP6
Length of guard tube (inner): 690
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113149
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2480 - 1113148

Specification

Type: WWE
Size: 2480
Shaft length (Lz): 860
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366786
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
Length of guard tube (outer): 540
Cone Type WH-A: RP6
Outer profile length: 610
Inner profile length: 630
Chain: K
SNR cone WH-I: 129928
Length of guard tube (inner): 535
Cross seal: STANDARD
Abbreviation attachment WH-I: AG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25

Product number: 1113148
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1800096

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 133834
Item no. attachment WH-I: 134548
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 990
Length of guard tube (outer): 900
SNR cone WH-I: 134401
SNR cone WH-A: 153044
Outer profile length: 960
Length of guard tube (inner): 705
Attachment type of profile: AA
Nipple form / position I/A: LZ LB
Cone type WH-I: WW80
Protective colour: Yellow
Cone Type WH-A: RP5
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: STF25Z

Product number: 1800096
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1800095

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 133834
Item no. attachment WH-I: 134548
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 153044
Attachment type of profile: AA
Nipple form / position I/A: LZ LB
Length of guard tube (outer): 550
Cone type WH-I: WW80
Outer profile length: 610
Cone Type WH-A: RP5
Inner profile length: 640
Protective colour: Yellow
SNR cone WH-I: 134401
Length of guard tube (inner): 550
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: STF25

Product number: 1800095
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1800094

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 133834
Item no. attachment WH-I: 134548
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Cone Type WH-A: RP5
Cone type WH-I: WW80
Inner profile length: 990
Nipple form / position I/A: LZ LB
Length of guard tube (inner): 730
Protective colour: Yellow
SNR cone WH-A: 199181
Outer profile length: 980
Length of guard tube (outer): 925
SNR cone WH-I: 134400
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: STF15Z

Product number: 1800094
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1800093

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 133834
Item no. attachment WH-I: 134548
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP5
Outer profile length: 630
Length of guard tube (inner): 575
SNR cone WH-I: 134400
Inner profile length: 640
Cone type WH-I: WW80
Length of guard tube (outer): 575
Nipple form / position I/A: LZ LB
Protective colour: Yellow
SNR cone WH-A: 199181
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: STF15

Product number: 1800093
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113156

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 135334
Item no. attachment WH-I: 384517
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Cone Type WH-A: RP5
Outer profile length: 960
SNR cone WH-A: 153044
Chain: K
Protective colour: Yellow
Length of guard tube (inner): 705
SNR cone WH-I: 134401
Cone type WH-I: WW80
Inner profile length: 980
Length of guard tube (outer): 900
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113156
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113155

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 135334
Item no. attachment WH-I: 384517
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Attachment type of profile: AA
Chain: K
Length of guard tube (outer): 925
Outer profile length: 980
Inner profile length: 990
Protective colour: Yellow
Length of guard tube (inner): 730
SNR cone WH-I: 134400
SNR cone WH-A: 199181
Cone Type WH-A: RP5
Cone type WH-I: WW80
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113155
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113147

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 41378
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 153044
Nipple form / position I/A: LL LB
Outer profile length: 960
SNR cone WH-I: 134401
Protective colour: Yellow
Length of guard tube (outer): 900
Attachment type of profile: AA
Chain: K
Inner profile length: 980
Cone type WH-I: WW80
Cone Type WH-A: RP5
Length of guard tube (inner): 705
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25Z

Product number: 1113147
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113146

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 41378
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 153044
Cone Type WH-A: RP5
Chain: K
Cone type WH-I: WW80
Nipple form / position I/A: LL LB
SNR cone WH-I: 134401
Length of guard tube (outer): 550
Protective colour: Yellow
Attachment type of profile: AA
Length of guard tube (inner): 540
Outer profile length: 610
Inner profile length: 640
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2AG
Profile tube - inner type: 1BGA
Guard type: SDF25

Product number: 1113146
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113145

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 1210
Item no. attachment WH-A: 41378
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-I: 134400
Cone type WH-I: WW80
Nipple form / position I/A: LL LB
Cone Type WH-A: RP5
Chain: K
Attachment type of profile: AA
Length of guard tube (inner): 730
SNR cone WH-A: 199181
Length of guard tube (outer): 925
Inner profile length: 990
Protective colour: Yellow
Outer profile length: 980
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113145
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1113144

Specification

Type: WWE
Size: 2380
Shaft length (Lz): 860
Item no. attachment WH-A: 41378
Item no. attachment WH-I: 365802
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
Attachment type of profile: AA
SNR cone WH-A: 199181
SNR cone WH-I: 134400
Chain: K
Outer profile length: 630
Inner profile length: 640
Length of guard tube (outer): 575
Cone type WH-I: WW80
Nipple form / position I/A: LL LB
Cone Type WH-A: RP5
Length of guard tube (inner): 560
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 1G
Profile tube - inner type: 0VGA
Guard type: SDF15

Product number: 1113144
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2280 - 1800092

Specification

Type: WWE
Size: 2280
Shaft length (Lz): 1210
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Inner profile length: 1020
Chain WH-A: K
Protective colour: Yellow
SNR cone WH-I: 134399
SNR cone WH-A: 365344
Length of guard tube (outer): 955
Outer profile length: 1005
Cone Type WH-A: RP4
Length of guard tube (inner): 755
Cone type WH-I: WW80
Nipple form / position I/A: LZ LB
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: STF15Z

Product number: 1800092
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2280 - 1800091

Specification

Type: WWE
Size: 2280
Shaft length (Lz): 860
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Nipple form / position I/A: LZ LB
Cone Type WH-A: RP4
Cone type WH-I: WW80
Protective colour: Yellow
Inner profile length: 670
SNR cone WH-I: 134399
Length of guard tube (inner): 600
Outer profile length: 655
Attachment type of profile: AA
Length of guard tube (outer): 605
SNR cone WH-A: 365344
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: STF15

Product number: 1800091
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2280 - 1113154

Specification

Type: WWE
Size: 2280
Shaft length (Lz): 1210
Item no. attachment WH-I: 384515
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Length of guard tube (inner): 755
Length of guard tube (outer): 955
Cone type WH-I: WW80
Outer profile length: 1005
Chain WH-I: K
Inner profile length: 1020
Cone Type WH-A: RP4
Attachment type of profile: AA
Chain WH-A: K
Protective colour: Yellow
SNR cone WH-I: 134399
SNR cone WH-A: 365344
Cross seal: STANDARD
Abbreviation attachment WH-I: DOPG
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113154
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2280 - 1113143

Specification

Type: WWE
Size: 2280
Shaft length (Lz): 1210
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Chain WH-A: K
SNR cone WH-A: 365344
Outer profile length: 1005
Cone type WH-I: WW80
Inner profile length: 1020
Nipple form / position I/A: LL LB
Chain WH-I: K
Protective colour: Yellow
Attachment type of profile: AA
Cone Type WH-A: RP4
Length of guard tube (outer): 955
SNR cone WH-I: 134399
Length of guard tube (inner): 755
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1K
Profile tube - inner type: 0VGA
Guard type: SDF15Z

Product number: 1113143
More information

Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2280 - 1113142

Specification

Type: WWE
Size: 2280
Shaft length (Lz): 860
Item no. attachment WH-I: 134544
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-I: KP1 3/8
Nipple form / position I/A: LL LB
Inner profile length: 660
SNR cone WH-I: 134399
Outer profile length: 660
Cone type WH-I: WW80
Protective colour: Yellow
Cone Type WH-A: RP4
Length of guard tube (inner): 600
Length of guard tube (outer): 605
Chain WH-I: K
Attachment type of profile: AA
SNR cone WH-A: 365344
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 1G
Profile tube - inner type: 0VGA
Guard type: SDF15

Product number: 1113142
More information

Walterscheid® PTO Driveshaft W 2600 - 1800074

Specification

Type: W
Size: 2600
Shaft length (Lz): 1210
Item no. attachment WH-A: 195121
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 148107
Cone Type WH-A: RP7
Nipple on sliding profile: PR-NIPP-2
Sliding profile seal: PR-VERSCHLOSSEN
Protective colour: Yellow
SNR cone WH-I: 170106
Inner profile length: 1040
Chain WH-I: K
Cone type WH-I: RP7
Nipple form / position I/A: LB LB
Length of guard tube (outer): 940
Length of guard tube (inner): 945
Attachment type of profile: AA
Outer profile length: 1010
Chain WH-A: K
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1800074
More information

Walterscheid® PTO Driveshaft W 2600 - 1800073

Specification

Type: W
Size: 2600
Shaft length (Lz): 1010
Item no. attachment WH-A: 195121
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-I: 170106
Inner profile length: 840
Nipple form / position I/A: LB LB
Chain WH-I: K
Cone type WH-I: RP7
Outer profile length: 810
Nipple on sliding profile: PR-NIPP-2
Length of guard tube (inner): 745
Attachment type of profile: AA
Protective colour: Yellow
Sliding profile seal: PR-VERSCHLOSSEN
Chain WH-A: K
Cone Type WH-A: RP7
Length of guard tube (outer): 740
SNR cone WH-A: 148107
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1800073
More information

Walterscheid® PTO Driveshaft W 2600 - 1800072

Specification

Type: W
Size: 2600
Shaft length (Lz): 860
Item no. attachment WH-A: 195121
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Sliding profile seal: PR-VERSCHLOSSEN
Chain WH-A: K
Length of guard tube (inner): 595
Cone Type WH-A: RP7
Chain WH-I: K
Attachment type of profile: AA
Nipple form / position I/A: LB LB
SNR cone WH-I: 170106
Outer profile length: 660
SNR cone WH-A: 148107
Nipple on sliding profile: PR-NIPP-2
Inner profile length: 690
Protective colour: Yellow
Cone type WH-I: RP7
Length of guard tube (outer): 590
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AGCC
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1800072
More information

Walterscheid® PTO Driveshaft W 2600 - 1113134

Specification

Type: W
Size: 2600
Shaft length (Lz): 1210
Item no. attachment WH-A: 139123
Item no. attachment WH-I: 139123
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-I: K
Nipple form / position I/A: LB LB
Cone type WH-I: RP7
Sliding profile seal: PR-VERSCHLOSSEN
Protective colour: Yellow
Outer profile length: 1010
Inner profile length: 1040
SNR cone WH-I: 170106
Length of guard tube (outer): 940
Nipple on sliding profile: PR-NIPP-2
Chain WH-A: K
SNR cone WH-A: 148107
Cone Type WH-A: RP7
Attachment type of profile: AA
Length of guard tube (inner): 945
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1113134
More information

Walterscheid® PTO Driveshaft W 2600 - 1113133

Specification

Type: W
Size: 2600
Shaft length (Lz): 860
Item no. attachment WH-A: 139123
Item no. attachment WH-I: 139123
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Nipple form / position I/A: LB LB
SNR cone WH-A: 148107
Outer profile length: 660
Attachment type of profile: AA
Chain WH-I: K
Nipple on sliding profile: PR-NIPP-2
Inner profile length: 680
Length of guard tube (outer): 590
SNR cone WH-I: 170106
Cone type WH-I: RP7
Cone Type WH-A: RP7
Length of guard tube (inner): 590
Protective colour: Yellow
Sliding profile seal: PR-VERSCHLOSSEN
Chain WH-A: K
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1113133
More information

Walterscheid® PTO Driveshaft W 2600 - 1113118

Specification

Type: W
Size: 2600
Shaft length (Lz): 1210
Item no. attachment WH-A: 320801
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 1040
Cone type WH-I: RP7
Cone Type WH-A: RP7
Chain WH-I: K
Outer profile length: 1010
Length of guard tube (outer): 940
Nipple form / position I/A: LB LB
SNR cone WH-A: 148107
Chain WH-A: K
Nipple on sliding profile: PR-NIPP-2
Attachment type of profile: AA
Length of guard tube (inner): 945
Protective colour: Yellow
Sliding profile seal: PR-VERSCHLOSSEN
SNR cone WH-I: 170106
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1113118
More information

Walterscheid® PTO Driveshaft W 2600 - 1113117

Specification

Type: W
Size: 2600
Shaft length (Lz): 1010
Item no. attachment WH-A: 320801
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Nipple on sliding profile: PR-NIPP-2
Sliding profile seal: PR-VERSCHLOSSEN
Length of guard tube (inner): 745
Cone Type WH-A: RP7
Outer profile length: 810
Chain WH-A: K
Chain WH-I: K
Protective colour: Yellow
Cone type WH-I: RP7
Attachment type of profile: AA
SNR cone WH-A: 148107
Inner profile length: 840
SNR cone WH-I: 170106
Length of guard tube (outer): 740
Nipple form / position I/A: LB LB
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1113117
More information

Walterscheid® PTO Driveshaft W 2600 - 1113116

Specification

Type: W
Size: 2600
Shaft length (Lz): 860
Item no. attachment WH-A: 320801
Item no. attachment WH-I: 365814
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 148107
Cone Type WH-A: RP7
Length of guard tube (outer): 590
Cone type WH-I: RP7
Chain WH-I: K
Attachment type of profile: AA
SNR cone WH-I: 170106
Chain WH-A: K
Nipple form / position I/A: LB LB
Inner profile length: 680
Protective colour: Yellow
Length of guard tube (inner): 590
Sliding profile seal: PR-VERSCHLOSSEN
Nipple on sliding profile: PR-NIPP-2
Outer profile length: 660
Cross seal: P-DICHTUNG
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S6
Profile tube - inner type: S5H
Guard type: SD35

Product number: 1113116
More information

Walterscheid® PTO Driveshaft W 2500 - 1800088

Specification

Type: W
Size: 2500
Shaft length (Lz): 1210
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 135336
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-A: K
Length of guard tube (outer): 970
Inner profile length: 1065
Protective colour: Yellow
Cone type WH-I: RP7
SNR cone WH-I: 199125
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Length of guard tube (inner): 775
Outer profile length: 1045
Cone Type WH-A: RP7
SNR cone WH-A: 199125
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25Z

Product number: 1800088
More information

Walterscheid® PTO Driveshaft W 2500 - 1800087

Specification

Type: W
Size: 2500
Shaft length (Lz): 860
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 135336
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Inner profile length: 715
Outer profile length: 695
Length of guard tube (outer): 620
Chain WH-A: K
Cone type WH-I: RP7
Cone Type WH-A: RP7
Nipple form / position I/A: LB LB
Length of guard tube (inner): 620
SNR cone WH-A: 199125
SNR cone WH-I: 199125
Attachment type of profile: AA
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25Z

Product number: 1800087
More information

Walterscheid® PTO Driveshaft W 2500 - 1800071

Specification

Type: W
Size: 2500
Shaft length (Lz): 1210
Item no. attachment WH-A: 699170
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 1065
Cone Type WH-A: RP7
Length of guard tube (outer): 970
Cone type WH-I: RP7
SNR cone WH-A: 199125
Protective colour: Yellow
Chain WH-A: K
Outer profile length: 1045
SNR cone WH-I: 199125
Length of guard tube (inner): 775
Nipple form / position I/A: LB LB
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25Z

Product number: 1800071
More information

Walterscheid® PTO Driveshaft W 2500 - 1800070

Specification

Type: W
Size: 2500
Shaft length (Lz): 1010
Item no. attachment WH-A: 699170
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Inner profile length: 865
Outer profile length: 845
Cone Type WH-A: RP7
Cone type WH-I: RP7
SNR cone WH-I: 199125
SNR cone WH-A: 199125
Length of guard tube (inner): 770
Protective colour: Yellow
Chain WH-A: K
Length of guard tube (outer): 770
Nipple form / position I/A: LB LB
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25Z

Product number: 1800070
More information

Walterscheid® PTO Driveshaft W 2500 - 1800069

Specification

Type: W
Size: 2500
Shaft length (Lz): 860
Item no. attachment WH-A: 699170
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (outer): 620
Attachment type of profile: AA
Outer profile length: 695
Cone Type WH-A: RP7
Cone type WH-I: RP7
Protective colour: Yellow
Inner profile length: 715
Length of guard tube (inner): 620
SNR cone WH-A: 199125
Nipple form / position I/A: LB LB
SNR cone WH-I: 199125
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25Z

Product number: 1800069
More information

Walterscheid® PTO Driveshaft W 2500 - 1800068

Specification

Type: W
Size: 2500
Shaft length (Lz): 710
Item no. attachment WH-A: 699170
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 565
Length of guard tube (outer): 470
Chain WH-A: K
Length of guard tube (inner): 470
SNR cone WH-A: 199125
Protective colour: Yellow
Outer profile length: 545
Nipple form / position I/A: LB LB
Cone Type WH-A: RP7
Cone type WH-I: RP7
Attachment type of profile: AA
SNR cone WH-I: 199125
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25

Product number: 1800068
More information

Walterscheid® PTO Driveshaft W 2500 - 1800067

Specification

Type: W
Size: 2500
Shaft length (Lz): 560
Item no. attachment WH-A: 699170
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 199125
Outer profile length: 395
Cone type WH-I: RP7
SNR cone WH-I: 199125
Cone Type WH-A: RP7
Length of guard tube (inner): 320
Length of guard tube (outer): 320
Chain WH-A: K
Nipple form / position I/A: LB LB
Protective colour: Yellow
Inner profile length: 415
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: ST25

Product number: 1800067
More information

Walterscheid® PTO Driveshaft W 2500 - 1113132

Specification

Type: W
Size: 2500
Shaft length (Lz): 1210
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 135336
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-I: K
Outer profile length: 1045
Cone Type WH-A: RP7
Nipple form / position I/A: LB LB
Inner profile length: 1065
Chain WH-A: K
Attachment type of profile: AA
Length of guard tube (outer): 970
SNR cone WH-I: 199125
Protective colour: Yellow
Length of guard tube (inner): 775
SNR cone WH-A: 199125
Cone type WH-I: RP7
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25Z

Product number: 1113132
More information

Walterscheid® PTO Driveshaft W 2500 - 1113131

Specification

Type: W
Size: 2500
Shaft length (Lz): 860
Item no. attachment WH-A: 135336
Item no. attachment WH-I: 135336
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-A: K
Outer profile length: 695
SNR cone WH-I: 199125
Length of guard tube (inner): 620
Attachment type of profile: AA
Cone Type WH-A: RP7
Chain WH-I: K
Inner profile length: 715
Protective colour: Yellow
Nipple form / position I/A: LB LB
SNR cone WH-A: 199125
Length of guard tube (outer): 620
Cone type WH-I: RP7
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25

Product number: 1113131
More information

Walterscheid® PTO Driveshaft W 2500 - 1113115

Specification

Type: W
Size: 2500
Shaft length (Lz): 1210
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (inner): 775
Cone type WH-I: RP7
SNR cone WH-I: 199125
Outer profile length: 1045
Chain WH-I: K
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Length of guard tube (outer): 970
Inner profile length: 1065
Protective colour: Yellow
SNR cone WH-A: 199125
Cone Type WH-A: RP7
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25Z

Product number: 1113115
More information

Walterscheid® PTO Driveshaft W 2500 - 1113114

Specification

Type: W
Size: 2500
Shaft length (Lz): 1010
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP7
Chain WH-A: K
SNR cone WH-I: 199125
SNR cone WH-A: 199125
Cone type WH-I: RP7
Chain WH-I: K
Length of guard tube (outer): 770
Outer profile length: 845
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Protective colour: Yellow
Inner profile length: 865
Length of guard tube (inner): 770
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25

Product number: 1113114
More information

Walterscheid® PTO Driveshaft W 2500 - 1113113

Specification

Type: W
Size: 2500
Shaft length (Lz): 860
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Chain WH-I: K
Cone type WH-I: RP7
Outer profile length: 695
Protective colour: Yellow
SNR cone WH-I: 199125
Inner profile length: 700
Cone Type WH-A: RP7
Length of guard tube (outer): 620
Chain WH-A: K
SNR cone WH-A: 199125
Length of guard tube (inner): 620
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25

Product number: 1113113
More information

Walterscheid® PTO Driveshaft W 2500 - 1113112

Specification

Type: W
Size: 2500
Shaft length (Lz): 710
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP7
Protective colour: Yellow
Chain WH-I: K
SNR cone WH-I: 199125
Inner profile length: 565
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Chain WH-A: K
Cone type WH-I: RP7
Length of guard tube (inner): 470
SNR cone WH-A: 199125
Outer profile length: 545
Length of guard tube (outer): 470
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25

Product number: 1113112
More information

Walterscheid® PTO Driveshaft W 2500 - 1113111

Specification

Type: W
Size: 2500
Shaft length (Lz): 560
Item no. attachment WH-A: 97136
Item no. attachment WH-I: 366798
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
Length of guard tube (inner): 320
Attachment type of profile: AA
SNR cone WH-I: 199125
Chain WH-A: K
Chain WH-I: K
Nipple form / position I/A: LB LB
Cone type WH-I: RP7
Outer profile length: 395
Cone Type WH-A: RP7
Length of guard tube (outer): 320
SNR cone WH-A: 199125
Inner profile length: 415
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4
Guard type: SD25

Product number: 1113111
More information

Walterscheid® PTO Driveshaft W 2400 - 1800086

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
SNR cone WH-A: 199175
Inner profile length: 1085
SNR cone WH-I: 199175
Chain WH-A: K
Cone Type WH-A: RP6
Protective colour: Yellow
Outer profile length: 1065
Length of guard tube (outer): 995
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Length of guard tube (inner): 795
Cone type WH-I: RP6
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25Z

Product number: 1800086
More information

Walterscheid® PTO Driveshaft W 2400 - 1800085

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Protective colour: Yellow
Nipple form / position I/A: LB LB
Outer profile length: 715
Length of guard tube (outer): 645
Cone Type WH-A: RP6
Chain WH-A: K
Attachment type of profile: AA
SNR cone WH-I: 199175
Length of guard tube (inner): 640
Inner profile length: 735
Cone type WH-I: RP6
SNR cone WH-A: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25Z

Product number: 1800085
More information

Walterscheid® PTO Driveshaft W 2400 - 1800084

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Cone Type WH-A: RP6
Inner profile length: 1085
Nipple form / position I/A: LB LB
Protective colour: Yellow
Length of guard tube (outer): 995
Length of guard tube (inner): 795
SNR cone WH-A: 199175
Chain WH-A: K
SNR cone WH-I: 199175
Outer profile length: 1065
Attachment type of profile: AA
Cone type WH-I: RP6
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25Z

Product number: 1800084
More information

Walterscheid® PTO Driveshaft W 2400 - 1800083

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Attachment type of profile: AA
SNR cone WH-A: 199175
Cone type WH-I: RP6
Length of guard tube (outer): 645
Inner profile length: 735
Protective colour: Yellow
Outer profile length: 715
Length of guard tube (inner): 640
Nipple form / position I/A: LB LB
Chain WH-A: K
Cone Type WH-A: RP6
SNR cone WH-I: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25

Product number: 1800083
More information

Walterscheid® PTO Driveshaft W 2400 - 1800066

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Inner profile length: 1085
Cone type WH-I: RP6
Outer profile length: 1065
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Length of guard tube (inner): 795
Chain WH-A: K
Length of guard tube (outer): 995
SNR cone WH-I: 199175
Cone Type WH-A: RP6
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25Z

Product number: 1800066
More information

Walterscheid® PTO Driveshaft W 2400 - 1800065

Specification

Type: W
Size: 2400
Shaft length (Lz): 1010
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (outer): 795
Cone Type WH-A: RP6
Length of guard tube (inner): 790
Inner profile length: 885
Attachment type of profile: AA
Cone type WH-I: RP6
Nipple form / position I/A: LB LB
Protective colour: Yellow
SNR cone WH-A: 199175
Chain WH-A: K
Outer profile length: 865
SNR cone WH-I: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25Z

Product number: 1800065
More information

Walterscheid® PTO Driveshaft W 2400 - 1800064

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Outer profile length: 715
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Cone type WH-I: RP6
Protective colour: Yellow
Length of guard tube (outer): 645
Chain WH-A: K
Length of guard tube (inner): 640
Inner profile length: 735
Cone Type WH-A: RP6
SNR cone WH-A: 199175
SNR cone WH-I: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25Z

Product number: 1800064
More information

Walterscheid® PTO Driveshaft W 2400 - 1800063

Specification

Type: W
Size: 2400
Shaft length (Lz): 710
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Chain WH-A: K
Protective colour: Yellow
Length of guard tube (inner): 490
Attachment type of profile: AA
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Inner profile length: 585
Length of guard tube (outer): 495
Outer profile length: 565
SNR cone WH-I: 199175
Cone type WH-I: RP6
Cone Type WH-A: RP6
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25

Product number: 1800063
More information

Walterscheid® PTO Driveshaft W 2400 - 1800062

Specification

Type: W
Size: 2400
Shaft length (Lz): 560
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Outer profile length: 415
SNR cone WH-I: 199175
Cone type WH-I: RP6
Cone Type WH-A: RP6
Protective colour: Yellow
Nipple form / position I/A: LB LB
Attachment type of profile: AA
Length of guard tube (inner): 340
Length of guard tube (outer): 345
Inner profile length: 435
Chain WH-A: K
SNR cone WH-A: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: ST25

Product number: 1800062
More information

Walterscheid® PTO Driveshaft W 2400 - 1800061

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP6
SNR cone WH-I: 199175
Nipple form / position I/A: LB LB
SNR cone WH-A: 199175
Attachment type of profile: AA
Length of guard tube (inner): 795
Protective colour: Yellow
Cone type WH-I: RP6
Outer profile length: 1065
Chain WH-A: K
Length of guard tube (outer): 995
Inner profile length: 1085
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25Z

Product number: 1800061
More information

Walterscheid® PTO Driveshaft W 2400 - 1800060

Specification

Type: W
Size: 2400
Shaft length (Lz): 1010
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone type WH-I: RP6
SNR cone WH-I: 199175
SNR cone WH-A: 199175
Inner profile length: 885
Attachment type of profile: AA
Length of guard tube (outer): 795
Nipple form / position I/A: LB LB
Length of guard tube (inner): 790
Cone Type WH-A: RP6
Protective colour: Yellow
Chain WH-A: K
Outer profile length: 865
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25Z

Product number: 1800060
More information

Walterscheid® PTO Driveshaft W 2400 - 1800059

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 199175
Outer profile length: 715
Length of guard tube (outer): 645
SNR cone WH-I: 199175
Inner profile length: 735
Length of guard tube (inner): 640
Chain WH-A: K
Protective colour: Yellow
Cone type WH-I: RP6
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Cone Type WH-A: RP6
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25

Product number: 1800059
More information

Walterscheid® PTO Driveshaft W 2400 - 1800058

Specification

Type: W
Size: 2400
Shaft length (Lz): 710
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 199175
Inner profile length: 585
Nipple form / position I/A: LB LB
SNR cone WH-I: 199175
Attachment type of profile: AA
Length of guard tube (inner): 490
Length of guard tube (outer): 495
Outer profile length: 565
Cone Type WH-A: RP6
Protective colour: Yellow
Cone type WH-I: RP6
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25

Product number: 1800058
More information

Walterscheid® PTO Driveshaft W 2400 - 1800057

Specification

Type: W
Size: 2400
Shaft length (Lz): 560
Item no. attachment WH-A: 133836
Item no. attachment WH-I: 133836
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Inner profile length: 435
Length of guard tube (outer): 345
Cone type WH-I: RP6
Outer profile length: 415
Attachment type of profile: AA
Length of guard tube (inner): 340
Cone Type WH-A: RP6
Protective colour: Yellow
SNR cone WH-I: 199175
Chain WH-A: K
Cross seal: STANDARD
Abbreviation attachment WH-A: ASGE
Abbreviation attachment WH-I: ASGE
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: ST25

Product number: 1800057
More information

Walterscheid® PTO Driveshaft W 2400 - 1113130

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-I: K
Length of guard tube (inner): 795
Inner profile length: 1085
Chain WH-A: K
Attachment type of profile: AA
Length of guard tube (outer): 995
SNR cone WH-A: 199175
Cone type WH-I: RP6
Cone Type WH-A: RP6
Protective colour: Yellow
Nipple form / position I/A: LB LB
Outer profile length: 1065
SNR cone WH-I: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25Z

Product number: 1113130
More information

Walterscheid® PTO Driveshaft W 2400 - 1113129

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Protective colour: Yellow
SNR cone WH-A: 199175
Chain WH-I: K
Outer profile length: 715
Chain WH-A: K
Cone Type WH-A: RP6
Length of guard tube (inner): 640
Cone type WH-I: RP6
Nipple form / position I/A: LB LB
Length of guard tube (outer): 645
Inner profile length: 735
SNR cone WH-I: 199175
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25

Product number: 1113129
More information

Walterscheid® PTO Driveshaft W 2400 - 1113128

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Chain WH-A: K
Length of guard tube (inner): 795
Cone type WH-I: RP6
Chain WH-I: K
SNR cone WH-A: 199175
Outer profile length: 1065
Cone Type WH-A: RP6
Length of guard tube (outer): 995
Nipple form / position I/A: LB LB
Inner profile length: 1080
SNR cone WH-I: 199175
Attachment type of profile: AA
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25Z

Product number: 1113128
More information

Walterscheid® PTO Driveshaft W 2400 - 1113127

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 134770
Item no. attachment WH-I: 134770
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
SNR cone WH-I: 199175
Cone Type WH-A: RP6
Cone type WH-I: RP6
Protective colour: Yellow
Nipple form / position I/A: LB LB
SNR cone WH-A: 199175
Outer profile length: 715
Length of guard tube (outer): 645
Chain WH-I: K
Chain WH-A: K
Length of guard tube (inner): 640
Inner profile length: 735
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: ZK
Abbreviation attachment WH-I: ZK
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25

Product number: 1113127
More information

Walterscheid® PTO Driveshaft W 2400 - 1113110

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Outer profile length: 1065
SNR cone WH-I: 199175
Length of guard tube (inner): 795
SNR cone WH-A: 199175
Cone Type WH-A: RP6
Inner profile length: 1085
Chain WH-A: K
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Cone type WH-I: RP6
Chain WH-I: K
Length of guard tube (outer): 995
Protective colour: Yellow
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25Z

Product number: 1113110
More information

Walterscheid® PTO Driveshaft W 2400 - 1113109

Specification

Type: W
Size: 2400
Shaft length (Lz): 1010
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Protective colour: Yellow
Inner profile length: 880
Cone Type WH-A: RP6
Length of guard tube (inner): 780
Chain WH-A: K
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Cone type WH-I: RP6
Length of guard tube (outer): 795
SNR cone WH-I: 199175
Outer profile length: 865
Chain WH-I: K
Attachment type of profile: AA
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25

Product number: 1113109
More information

Walterscheid® PTO Driveshaft W 2400 - 1113108

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Cone Type WH-A: RP6
Inner profile length: 740
SNR cone WH-A: 199175
Attachment type of profile: AA
Chain WH-A: K
SNR cone WH-I: 199175
Nipple form / position I/A: LB LB
Protective colour: Yellow
Chain WH-I: K
Cone type WH-I: RP6
Length of guard tube (inner): 640
Length of guard tube (outer): 645
Outer profile length: 715
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25

Product number: 1113108
More information

Walterscheid® PTO Driveshaft W 2400 - 1113107

Specification

Type: W
Size: 2400
Shaft length (Lz): 710
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Outer profile length: 565
Cone type WH-I: RP6
SNR cone WH-I: 199175
Protective colour: Yellow
Inner profile length: 585
Cone Type WH-A: RP6
Chain WH-I: K
Length of guard tube (outer): 495
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Chain WH-A: K
Length of guard tube (inner): 490
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25

Product number: 1113107
More information

Walterscheid® PTO Driveshaft W 2400 - 1113106

Specification

Type: W
Size: 2400
Shaft length (Lz): 560
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
Nipple form / position I/A: LB LB
SNR cone WH-I: 199175
Cone type WH-I: RP6
Chain WH-A: K
Outer profile length: 415
Length of guard tube (inner): 340
SNR cone WH-A: 199175
Chain WH-I: K
Protective colour: Yellow
Inner profile length: 440
Cone Type WH-A: RP6
Length of guard tube (outer): 345
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: S5
Profile tube - inner type: S4LH
Guard type: SD25

Product number: 1113106
More information

Walterscheid® PTO Driveshaft W 2400 - 1113105

Specification

Type: W
Size: 2400
Shaft length (Lz): 1210
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Length of guard tube (outer): 995
Cone Type WH-A: RP6
SNR cone WH-A: 199175
Attachment type of profile: AA
Nipple form / position I/A: LB LB
Chain WH-I: K
Inner profile length: 1080
Chain WH-A: K
Cone type WH-I: RP6
Outer profile length: 1065
Protective colour: Yellow
SNR cone WH-I: 199175
Length of guard tube (inner): 795
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25Z

Product number: 1113105
More information

Walterscheid® PTO Driveshaft W 2400 - 1113104

Specification

Type: W
Size: 2400
Shaft length (Lz): 1010
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Attachment type of profile: AA
SNR cone WH-A: 199175
Cone type WH-I: RP6
Length of guard tube (inner): 780
Protective colour: Yellow
Nipple form / position I/A: LB LB
Chain WH-I: K
Cone Type WH-A: RP6
SNR cone WH-I: 199175
Chain WH-A: K
Inner profile length: 880
Outer profile length: 865
Length of guard tube (outer): 795
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25

Product number: 1113104
More information

Walterscheid® PTO Driveshaft W 2400 - 1113103

Specification

Type: W
Size: 2400
Shaft length (Lz): 860
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Inner profile length: 735
Chain WH-A: K
Outer profile length: 715
Attachment type of profile: AA
Chain WH-I: K
Cone Type WH-A: RP6
Length of guard tube (inner): 640
Cone type WH-I: RP6
Length of guard tube (outer): 645
Protective colour: Yellow
SNR cone WH-I: 199175
Nipple form / position I/A: LB LB
SNR cone WH-A: 199175
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25

Product number: 1113103
More information

Walterscheid® PTO Driveshaft W 2400 - 1113102

Specification

Type: W
Size: 2400
Shaft length (Lz): 710
Item no. attachment WH-A: 56699
Item no. attachment WH-I: 366782
Torque of clutch in daNm: 0
Rotation speed max. RPM: 1000 UPM
Form attachment WH-A: KP1 3/8
Form attachment WH-I: KP1 3/8
Chain WH-A: K
Protective colour: Yellow
Attachment type of profile: AA
Length of guard tube (inner): 490
SNR cone WH-I: 199175
Chain WH-I: K
Length of guard tube (outer): 495
Cone type WH-I: RP6
Cone Type WH-A: RP6
SNR cone WH-A: 199175
Nipple form / position I/A: LB LB
Inner profile length: 585
Outer profile length: 565
Cross seal: STANDARD
Abbreviation attachment WH-A: AG
Abbreviation attachment WH-I: QSG
Profile tube - outer type: 2A
Profile tube - inner type: 1B
Guard type: SD25

Product number: 1113102
More information

← Previous
1
2
3
Next →

Walterscheid® Gearboxes

For over 50 years, the Walterscheid Getriebe GmbH has been developing drive train systems for agricultural, construction and special machines in the state-of-the-art production facility in Sohland/Spree (Saxony, Germany).

Hauptstraße 150

PTO Driveshafts complete

Notify me when available