The ball coupling dimensions and field of application complying with ISO 24347, VO (EU) 2015/208 and regulation UN ECE R147, class a80. In its normal state, the device is in coupled and locked position. Only for connection with coupling heads 80 according to ISO 24347 or UN ECE R147, class b80. The coupling can be pivoted through 360°, the torque required for this purpose being 100 - 150 Nm.The range of application extends to the use on agricultural or forestry vehicles, self-propelled work machines or trailers.
Product advantages
Anti-twist device
Tool-free adjustable retainer
Forged modell with safety function
This is where WALTERSCHEID's retractable ball products of the KFD00 series score with their unique rollover protection function. The special design allows the ball carrier to rotate when coupled with a calotte, preventing the tractor and trailer from being separated, but only when a preset torque is exceeded. In normal trailer operation, the model can be regarded as virtually rigid. Users often use conventional retractable ball products designed by the manufacturers for hitch below the PTO, even in top hitch. In the event of overturning, the retainer bends or breaks and the tractor and implement are separated.
The scope of delivery includes 1x coupling ball type KFD800-5.
The fixing screws M20 (order number: 8004373) are not included in the delivery.
Suitable for connection to ball-type trailer shanks 80 according to ISO 24347.
The ball D=80 mm can be replaced (by authorized workshops) up to 2 times.
Approval No.: E1*147R00/00*0060
German Approval No.: M 9755
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- modular | Ball 80
- Model
- KFD800-5
- Flange dimension
- HD=160x100/21 mm
- Vertical load (daN)
- 2000 | 2800
- D-Value (kN)
- 89,3
- Norm DIN/ISO
- ISO 24347
- German approval no.
- M9755
- Approval
- E1 0060
- A (mm)
- 160
- B (mm)
- 100
- C (mm)
- 200
- D (mm)
- 140
- E (mm)
- 21
- AP-Code
- N-F-B-CG1-GR0-MP-DH-0
- Homologation
- E1 0060
- Data sheet
- 2.03.010
- Colour
- Black