Deutsch
English
Français
Walterscheid® Quick adjustable Support KU304F – 8002607
KU304 W=335/30/22 mm-5H
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
The quick adjustable support is suitable for accommodating height-adjustable couplings in a wide range of detent positions. In addition, it features highly wear-resistant guide rails. The PTO guard meets the latest safety requirements.
The model features a permanently integrated, highly wear-resistant forged piton pin and retainer.
Product advantages
The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
The model features a permanently integrated, highly wear-resistant forged piton pin and retainer.
Product advantages
The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
The scope of delivery includes 1x quick adjustable support KU304F.
For gear units with M16 mounting screws, please order 1 pcs. fitting kit (order number: 8005240).
For gear units with M16 mounting screws, please order 1 pcs. fitting kit (order number: 8005240).
Suitable for towing eyes according to DIN 9678 (ISO 5692-1) / ISO 20019.
German Approval No.: M 9760 | Approval No.: e1*89/173*0286
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Model
- KU304F
- Type of connection
- modular | piton 50
- Number of locking positions
- 5
- Vertical load (daN)
- 2000 | 3000 | 1800 | 3700
- Railsize
- W=335/30/22 mm
- D-Value (kN)
- 91,6 | 95,8 | 77,3 | 95,8
- Norm DIN/ISO
- DIN 9678 (ISO 5692-1) | ISO 5692 | ISO 20019
- German approval no.
- M9760
- Approval
- e1 0286
- AP Code
- F-OL0-VZP1-DH-0/ 38/65/72
- A (mm)
- 335
- B (mm)
- 30
- C (mm)
- 22
- D1 (mm)
- 346
- D2 (mm)
- 357
- D4 (mm)
- 342
- D3 (mm)
- 312
- E1 (mm)
- 64,5
- E2 (mm)
- 233
- E3 (mm)
- 145
- AP-Code
- F-OL0-VZP1-DH-0/ 38/65/72
- Data sheet
- 4.02.035
- Colour
- Claas grey
