Accessories
The scope of delivery includes 1x Foam ring SR80.
When the ball system is not in use, the cover AD80 is placed on the previously cleaned ball in order to avoid subsequent contamination.
The foam ring SR80 has to be removed. It is only put over when the ball system is in operation to prevent the ingress of dust or foreign bodies during use.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Model
- SR80
- AP Code
- OP-0
- AP-Code
- OP-0
- Data sheet
- 8.02.010
- Colour
- Yellow