Walterscheid® Hydraulic top link set HOLKS-C-120 CAT.4/3 - 1205129

Product number: 1205129

OBERLENKER HOLKS-C120 CAT.3 559-782 SET

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Hydraulic top link set Cat.4/3 with 223 mm stroke

Product advantages

Suitable for absorbing high tensile and compressive forces
All components can be exchanged separately
Large range of spare parts
Versatile use by adding different clevises
Long lifetime
Protection of the valve block with a reinforced special bracket

1x hydraulic top link C-120 Cat.4/3
1x bolt KPL139 (order number: 1206440)
1x bracket Cat.2/3 (order number: 1308347)

PLEASE NOTE:
The hose set and fork head are not included in the scope of delivery and may have to be purchased separately.

The hydraulic Walterscheid top link Cat.4/3 is only suitable for tractors with a maximum engine power of 220 kW (300 HP).
The hydraulic top link is usually supplied as a set with additional accessories. The item number of the top link is shown as a single assembly on the nameplate. This article number is not identical to the order number for a top link set. However, it can be entered in the search field on the website. The system then displays the item number for the top link set. The number in the type description of the top link indicates the inner diameter of the cylinder tube.

Top link questionnaire download

User manual Hydraulic top link HOL

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.