Wide-angle joint for drive shaft series P (PowerDrive)
Product advantages
PowerDrive joints are specially designed for machines in continuous operation and meet the highest requirements. The joints are equipped with special universal joint seals (multi-lip technology) whose shape and material prevent grease from escaping or dust from penetrating.
The scope of delivery includes a complete PJP480 joint with 1⅜‘‘ (6) connection profile.
Depending on the application, it is recommended that the wide angle joint can be operated up to a maximum angle of 80°. A constant angle during continuous operation of max. 20° should not be exceeded.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type
- PJ
- Size
- 480
- Manufacturer
- Walterscheid
- Torque of clutch in daNm
- 0
- Cross seal
- P-DICHTUNG