Walterscheid® PowerDrive wide angle joint PJ 580 - 1113328

Product number: 1113328

PJ 580 3684320 3613312 LZ ***

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Wide-angle joint for drive shaft series P (PowerDrive)

Product advantages

PowerDrive joints are specially designed for machines in continuous operation and meet the highest requirements. The joints are equipped with special universal joint seals (multi-lip technology) whose shape and material prevent grease from escaping or dust from penetrating.

Walterscheid Identification guide for driveshafts

Repair instructions joint

Repair instructions PowerDrive wide angle joint (80 degrees)

The scope of delivery includes a complete PJP580 joint with 1¾‘‘ (20) connection profile.

Depending on the application, it is recommended that the wide angle joint can be operated up to a maximum angle of 80°. A constant angle during continuous operation of max. 20° should not be exceeded.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.