Walterscheid® Safety Shield universal - 1605742

Product number: 1605742

SC-TOPF A275 B217 L240 ZB58 TK105 13X28-8 SW MANSCH+DECKEL-2

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Black safety shield with variable hole pattern! Through the long holes, which are located 45 ° radially on the protective bottom of the cup, should also be suitable for your application.
Protective pot with universal hole pattern and slot

Ø13x28mm 90 - 120mm

The scope of delivery includes 1x safety shield, 1x sleeve, 4x sheet metal screw and 2x safety shield cover.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.

Type: SC-TOPF
Size: Black
Drawing: 82.47.537B
Colour: Black

ass: 0 sim: 0 croo: 0

© 2024 - Walterscheid Productfinder – v4.4b | Walterscheid GmbH | Walterscheid GmbH | We reserve the right to make design changes. Only use products for the intended purpose. We only accept responsibility for consistent quality. Reprints whether in whole or in part are only allowed with the written permission of Walterscheid GmbH.

Walterscheid® Gearboxes

For over 50 years, the Walterscheid Getriebe GmbH has been developing drive train systems for agricultural, construction and special machines in the state-of-the-art production facility in Sohland/Spree (Saxony, Germany).

Hauptstraße 150

Walterscheid® Safety Shield universal - 1605742

Notify me when available