Walterscheid® Drawbar Top Part ZPA-4 – 8004893

Product number: 8004893

HD=140x100/17-50 mm CAT4

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

This model is fitted for the Walterscheid Changing System, pin cylindrical D=50 mm.

The scope of delivery includes 1x Drawbar top part ZPA-4 and 2x clamping sleeves (order number: 8004781).

If required, also order additional securing plate for the reception of safety chain (order number: 8002921).

Suitable for towing eyes according to ISO 21444.

Length of fixing screws M16 ISO4014 (DIN931) Quality 10.9 is depending on thickness of the base body.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.