Towing Eye Type 7225.20

Product number: 8005577

50x160x58-145x145-8H-21 mm

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

The towing eye is designed for applications in heavy soil tillage. Due to the integrated pivot bushing, large movement angles are achieved. The shaft is also freely rotatable through 360 °. Their extremely robust design allows use in extremely dusty conditions, which are common in agricultural use. Our product is made of forged steel.

The scope of delivery includes 1x towing eye 7225.20 with type plate.

If required, please order 8 pcs. mounting screws M20x70 10.9 DIN 912 (order number: 8005166)

Towing eye according to ISO 21244.

Approval No.: e1*2015/208*2018/829 ND*00491

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.