Towing couplings are only used for towing inoperable vehicles and in exceptional cases for manoeuvring purposes. The couplings largely correspond to DIN 74056. Furthermore it has a cylindrical pin D=25 mm + ball. Use for trailer operation is not permitted. The couplings are usually rigidly attached to the front end of the vehicle in the middle. They can also be attached to the rear end of the vehicle, but not for use as a trailer. Towing couplings do not require type approvals, but all Walterscheid types have been horizontally statically tested by RWTÜV in accordance with Directive 77/389/EC. The couplings are not intended to accept vertical loads.
The coupling ball complies in ball dimensions and field of application regulation UNECE R55, class A50.
The scope of delivery includes 1x coupling clevis type flange KU630-250.
Suitable for towing eyes according to DIN 74054 (ISO 8755), DIN 8454.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Model
- KU630-
- Type of connection
- non automatic, coupling pin cylindrical
- max. pulling load (t)
- 10
- Flange dimension
- HD=90-120/17 mm
- Vertical load (daN)
- 300
- D-Value (kN)
- 19,6
- Norm DIN/ISO
- DIN 74054 (ISO 8755) | DIN 8454
- AP Code
- N-F-SAH-G-RC0-NH-0
- A (mm)
- 90
- B (mm)
- 120
- C (mm)
- 160
- D (mm)
- 82
- E (mm)
- 17
- F (mm)
- 188
- AP-Code
- N-F-SAH-G-RC0-NH-0
- Data sheet
- 1.03.025
- Colour
- Black