Towing Eye Type ZO11026-40B

Product number: 8000616

40x100x42-110x100-6H-17 mm

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

The ring dimensions of the towing ring and shank complying with DIN 11026 (ISO 5692-2). The range of application extends to the use on agricultural or forestry trailers.

Product advantages

Made of forged steel

The scope of delivery includes 1x towing eye type Zo11026-40B with type plate.
An exchangeable bush for the coupler eye is also included.

The necessary fitting screws M16x50 10.9 DIN 912 (order number: 8004950) are not included in the scope of delivery and must be ordered as required. The quantity of screws depends on the number of holes.

Towing eye according to DIN 11026 (ISO 5692-2) / ISO 5692-2.

In case of wear suitable interchangeable drawbar bush for ZO11026-40B (order number: 8004936).

German Approval No.: N 2068 | Approval No.: e4*94/20*0962 | Approval No.:55R-012578

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.