Walterscheid® Set - Test Gauges For Hitches PK-WAL – 8005546

Product number: 8005546

PK-WAL

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

The special box contains an assortment of test gauges and tools for determining the degree of wear on hitch systems.

Content Special Box PK-WAL: 1x Special Tool MW-WAL (8004971), 1x Test Calotte PK80 (8005483), 1x Special Tool PL-ZWL50 (8005380), 1x Special Tool PF-WAL (8005084), 1x Special Tool PL-WAL (8004932), 1x Flashlight, 1x Assembly and Instruction Guide

DAkkS calibration certificate can be supplied for an additional charge.
Please order in this case by Prüfmittel 24.

https://www.pruefmittel24.com/artikel/nummer/41120060

Special Tool MW-WAL is used to secure the lock nut below the ball 80.
Calotte PK80 for determination of adjustment of chain guides, allows comfortable condition diagnosis of ball 80.
Special tool PL-ZWL50 to check the wear limit of power steering systems ZWL50 and Calotte ZKK50-M30x2.
Special tool PF-WAL to check the wear limit of Piton-Fix pins and towing eyes with D=50 mm.
Special tool PL-WAL to check the wear limit of pin-or ball couplings and towing eyes with D=40 mm. For further details please refer to the assembly and instruction guide.
The flashlight helps to light up the inner zone of the calotte, adjustable rails of bolt couplings and shaft bearings.
The special box includes an assembly and instruction guide with a detailed description of each tool. Information about the wear limit of the different coupling devices are also included.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.

Model: PK-WAL
AP Code: MP-0
A (mm): 420
B (mm): 350
C (mm): 160
AP-Code: MP-0
Data sheet: 8.09.050
Colour: Black