Towing Eye Type Zotek-50

The scope of delivery includes 1x towing eye type Zotek-50 without type plate.

When installing the towing eyelet in a support device, the relevant regulations (e.g. UVV vehicles) and the attachment guidelines of the vehicle manufacturer must be observed! The towing eyelet must be type-approved together with the mounting device. Please refer to the requirements of §27 StVZO regarding the data in the vehicle documents with regard to the permissible trailer load. In the case of installation within the scope of the German Road Traffic Licensing Regulations (StVZO), the installation must be approved by a technical inspection authority. The towing eyelet must only be installed by an authorized specialist workshop. Test report on weld seam strength TK10016_2.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.

Towing eye ZOTEK-50 similar to DIN 9678 (ISO 5692-1).

Type of connection

standard towing eye D=50 mm | pickup-hitchring | non turnfromle

Model

Zotek-50

Vertical load (daN)

3000

D-Value (kN)

75

Norm DIN/ISO

ISO 20019

AP Code

N-Y-OP-GE-NH-0

A (mm)

65

B (mm)

123

C (mm)

165

D (mm)

30

E (mm)

50

W (mm)

35

Y (mm)

23

AP-Code

N-Y-OP-GE-NH-0

X (mm)

80

Data sheet

7.08.030

Z (mm)

22

Colour

Without color