Deutsch
English
Français
Walterscheid® Calotte ZKK80-145 - 8003310
HD145x145-8-21-260 mm
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
This product is a calotte suitable for connection with a coupling ball D=80 mm (ISO 24347) respectively class a80 according to UN regulation R147. The range of application extends to the use on agricultural or forestry trailers.
Product advantages
Forged
Maximum space on calottes to move up to 36°
Inside furrows ensure optimal lubrication
Created for heavy duty work
Product advantages
Forged
Maximum space on calottes to move up to 36°
Inside furrows ensure optimal lubrication
Created for heavy duty work
The scope of delivery includes 1x calotte ZKK80-145.
The 8 pcs. mounting screws M20x80 10.9 DIN 912 (order number: 8004951) are not included in the scope of delivery and must be ordered if required.
The 8 pcs. mounting screws M20x80 10.9 DIN 912 (order number: 8004951) are not included in the scope of delivery and must be ordered if required.
Calotte according ISO 24347.
German Approval No.: M 9756 | Approval No.: e1*94/20*1783 | e1*2015/208*2018/829ND*00315
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- modular | Ball 80
- Model
- ZKK80-145
- Flange dimension
- HD=145x145/21 mm
- Vertical load (daN)
- 6000 | 1000
- D-Value (kN)
- 123,0 | 140,5
- Norm DIN/ISO
- ISO 24347
- German approval no.
- M9756
- Approval
- e1 1783 | e1 00315 | E1 0038
- AP Code
- N-SAH-OP-GE-DH-0
- A (mm)
- 260
- B (mm)
- 145
- C (mm)
- 145
- D (mm)
- 200
- E (mm)
- 21
- F (mm)
- 145-160
- AP-Code
- N-SAH-OP-GE-DH-0
- Data sheet
- 7.01.010
- Colour
- Black
