Deutsch
English
Français
Towing Eye Type Zo5110
50x110x30-110x100-8H-17 mm
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
The ring dimensions of the towing ring complying with ISO 20019. The range of application extends to the use on agricultural or forestry trailers.
Product advantages
Made of forged steel
Product advantages
Made of forged steel
The scope of delivery includes 1x towing eye type Zo5110 with type plate.
If required, please order 8 pcs. mounting screws M16x50 10.9 DIN 912 (order number: 8004950).
If required, please order 8 pcs. mounting screws M16x50 10.9 DIN 912 (order number: 8004950).
Towing eye similar to DIN 9678 (ISO 5692-1) / ISO 20019. The drawbar eyes correspond to ISO 20019 with regard to their ring dimensions.
German Approval No.: M 10105 | Approval No.: E1 55R-012340 | e1*2015/208*2018/829ND*00688
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- standard towing eye D=50 mm | pickup-hitchring | non turnfromle
- Model
- Zo5110
- Flange dimension
- HD=110x100/17 mm
- Vertical load (daN)
- 3000 | 1500
- D-Value (kN)
- 89,3 | 95,3
- Norm DIN/ISO
- ähnlich ISO 20019
- German approval no.
- M10105
- Approval
- e1 2340 | e1 00688
- AP Code
- N-SAH-OP-GE-DH-0
- A (mm)
- 240
- B (mm)
- 100
- C (mm)
- 110
- D (mm)
- 154
- E (mm)
- 17
- F (mm)
- 100-110
- Y (mm)
- 32-34
- AP-Code
- N-SAH-OP-GE-DH-0
- X (mm)
- 110-115
- W (mm)
- 50
- Data sheet
- 7.05.020
- Z (mm)
- 35-37
- Colour
- Black
