Deutsch
English
Français
Walterscheid® Lower link hook set UHKS-C CAT.3 - 1200052
UHKS-C CAT.3 ELEKTRODEN GR.GELB SET
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Discontinued Model. Limited availability. Successor product: 1208550
Product advantages
Suitable for absorbing high tensile, compressive and lateral forces
Centering bevels facilitate the coupling process
Safety lock prevents unintentional opening
Low sensitivity to dirt due to few components and dirt outlet opening
The locking pawl can be secured with a screw for complete locking
Product advantages
Suitable for absorbing high tensile, compressive and lateral forces
Centering bevels facilitate the coupling process
Safety lock prevents unintentional opening
Low sensitivity to dirt due to few components and dirt outlet opening
The locking pawl can be secured with a screw for complete locking
2x lower link hooks Cat.3 (order number: 1200020)
2x ball sleeves Cat.3/2 (order number: 1099039)
2x ball guide cone Cat.3/2 (order number: 1099035)
2x double eyelets (order number: 1098647)
1x stick electrode set (order number: 1094008)
1x double clamp (order number: 1305432)
1x spacer
1x actuating cable 3500 mm (order number: 1305393)
2x ball sleeves Cat.3/2 (order number: 1099039)
2x ball guide cone Cat.3/2 (order number: 1099035)
2x double eyelets (order number: 1098647)
1x stick electrode set (order number: 1094008)
1x double clamp (order number: 1305432)
1x spacer
1x actuating cable 3500 mm (order number: 1305393)
The Walterscheid lower link catch hook Cat.3 is only suitable for tractors with a maximum engine power of 165 kW (225 HP).
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type
- Cat. 3
- Manufacturer
- Walterscheid
- Power max. kW (HP)
- 165 (225)
