Deutsch
English
Français
Walterscheid® Stfromiliser body HGST - 1201758
STABILISATOR-GRUNDK HGST L350 M30 HUB30
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Walterscheid Stabiliser HGST with hydraulic body
Product advantages
Automatic switching between rigid and floating position when raising and lowering the power lift
Permanent rigid or floating position possible at any time
Convenient control from the driver’s seat
Centres actively and stabilises completely smoothly and with absolutely no play
Minimises wear on the three-point linkage and the tyres
Offers maximum safety on slopes and on the road
Simplifies and rationalises work on difficult terrain
Integrated in the tractor’s hydraulic circuit without occupying a control valve
Product advantages
Automatic switching between rigid and floating position when raising and lowering the power lift
Permanent rigid or floating position possible at any time
Convenient control from the driver’s seat
Centres actively and stabilises completely smoothly and with absolutely no play
Minimises wear on the three-point linkage and the tyres
Offers maximum safety on slopes and on the road
Simplifies and rationalises work on difficult terrain
Integrated in the tractor’s hydraulic circuit without occupying a control valve
The scope of delivery includes the stabiliser body. Control set (order number: 1201777), shuttle valve (order number: 1202997) and spacers (order number: 1200647) are not included in the scope of delivery and may have to be purchased separately.
Designed for mechanical lower links
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Manufacturer
- Walterscheid
- L (mm)
- 350
- G
- M30
- Hoisting capacity (mm)
- 30
