Walterscheid hydraulic stabiliser set HVST 540
Product advantages
With the hydraulically adjustable side strut HVST it is possible to move the complete three-point linkage including the attachment sideways by up to 25 cm while driving - and thus, e.g. B. with mower combinations to ensure the overcut in drifting tractors.
1x HVST base body (order number: 1203485)
1x fork rod (order number: 1203495)
1x rod head (order number: 1203497)
2x hydraulic hose (order number: 1203498)
1x safety spring (order number: 1203496)
1x reducing sleeve (order number: 1082649)
4x spacers 26 (order number: 1200647)
4x spacers 21 (order number: 1309253)
Designed for mechanical lower links
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Manufacturer
- Walterscheid
- Pos. HVST
- 2
- Designation
- Einbaulänge from / Installation length from / Longueur totale à partir de / 650 mm
Deutsch
English
Français
