Mechanical stabilisers

Automatic lateral stabiliser ASST and ADSST

The automatic lateral stabilisers stabilise every lower link against tensile and compressive forces, and thus also the attached implement. During work, switching between rigid and floating position takes place automatically during lifting and lowering of the implement. During lifting, the implement moves through the centre position, where it engages safely, then remains stable.

The lift height at which stabilisation is to start is pre-set by adjusting the chain length outside the hazard area behind the tractor and can thus be adapted to suit every implement and application.

Width of spread

The width of spread of the lower link is infinitely variable and is set simply by turning the forked rod. The special design rules out the possibility of the width of spread being changed unintentionally.

ASST-B product features

• Automatic switching between rigid and floating position when raising and lowering the power lift
• Stabilisation is set by attaching a chain, without having to enter the hazard area
• Simple coupling and uncoupling: the width of spread of the lower links is maintained at the set distance by springs
• Automatic release during lowering of the implement simplifies working operations in the field
• Improves road safety during transport
• Retrofit system for installation by the user for over 300 tractors

ATTENTION!

With all stabilisers, always pay attention to correct setting of the width of spread. Incorrect settings can result in increased wear on the stabilisers or the lower link hooks!