Walterscheid® Top link TKPL SOLH-B CAT.3H - 1200192

Product number: 1200192


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Spindle top link Cat.3 with catch hook

Product advantages

Equipped with original Walterscheid hooks
Special anti-twist protection against unintentional changes in length
Versatile due to different connection options
Large spectrum of lengths and adjustment ranges
Long service life thanks to corrosion protection and lubrication option
Available for all types of tractors
All individual components are available as spare parts or for retrofitting
The scope of delivery includes 1x step tube (order number: 1309692), 1x top link hook Cat.3H (order number: 1309671), 1x rod head Cat.3 (order number: 1309739), 1x bolt (order number: 1308609) and 2x locking ring (order number: 1702048).

A fork head is not included in the scope of delivery and may have to be purchased separately.
The Walterscheid spindle top link Cat.3 is only suitable for tractors with a maximum engine power of 135 kW (184 HP).
The hydraulic top link is usually supplied as a set with additional accessories. The item number of the top link is shown as a single assembly on the nameplate. This article number is not identical to the order number for a top link set. However, it can be entered in the search field on the website. The system then displays the item number for the top link set.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
L min - L max (mm)
602 - 912

ass: 8 sim: 0 croo: 0