Ball Coupling KF50-HD90X17

Product number: 8000483

KK50 HD=90-65x73/17 mm

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Coupling ball D=50 mm with flange.
The coupling ball complies in ball dimensions and field of application regulation UNECE R55, class A50. The range of application extends to the use on motor vehicles.

Product advantages

The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.

The scope of delivery includes 1x Ball coupling KF50-HD90X17.

2 pcs. fitting screw M16 8.8 can be supplied on request, if required.

usable for mounting on adapterplates type ANP and KAD

Suitable ball 50 products can be found (order number: 8000583 or 8003808)

Approval No.: e4*94/20*94/20*3319

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.