Deutsch
English
Français
Walterscheid® Coupling Clevis Type KU2000/750NB – 8005285
KU750 120/170/108/25 mm
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
This product is an automatic trailer coupling. With regard to the jaw dimensions and the area of use, it complies with DIN 11028, RREG 2009/144/EG, VO (EU) 2015/208, UN ECE R147 and class c40. In normal position is the coupling in closed and locked position. The coupling is designed with a lever trigger system, i.e. the coupling procedure is triggered by moving a trailer ring into the clevis and pressing back the trigger lever. Furthermore it has a crowned pin D=37 mm and can be privoted through 360°. The torque required for this purpose being 100 to 150 Nm. The range of application extends to the use on agricultural or forestry vehicles, self-propelled work machines or trailers.
Product advantages
The coupling is with pins adjustable
made of forged steel
360 degree free turnable
Product advantages
The coupling is with pins adjustable
made of forged steel
360 degree free turnable
The scope of delivery includes 1x coupling clevis type KU2000/750NB.
Fixing pins (order number: 8002410) are not included in the delivery.
Fixing pins (order number: 8002410) are not included in the delivery.
Suitable for towing eyes according to DIN 11026 (ISO 5692-2)/ DIN 11043/ DIN 74054 (ISO 8755)/ DIN 9678 (ISO 5692-1).
If necessary, use appropriate washers to position the coupling.
The coupling is suitable for two different mounting situations. It is built as standard for brackets on vehicles with a distance of 120 mm.By exchanging the right and left bearing plate during assembly it can also be used for brackets with a distance of 105 mm.
If necessary, use appropriate washers to position the coupling.
The coupling is suitable for two different mounting situations. It is built as standard for brackets on vehicles with a distance of 120 mm.By exchanging the right and left bearing plate during assembly it can also be used for brackets with a distance of 105 mm.
Approval No.: e1*2009/144*2013/8*0558
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- automatic, coupling pin crowned
- Model
- KU2000/750NB
- Vertical load (daN)
- 2000
- D-Value (kN)
- 60
- Norm DIN/ISO
- DIN 11026 (ISO 5692-2) | DIN 11043 | DIN 74054 (ISO 8755) | DIN 9678 (ISO 5692-1)
- Approval
- e1 0558
- AP Code
- A-PAH-C-RC0-EH-0/35
- A (mm)
- 108
- B (mm)
- 25
- C (mm)
- 170
- D (mm)
- 105/120
- E (mm)
- 37
- AP-Code
- A-PAH-C-RC0-EH-0/35
- Data sheet
- 1.02.101
- Colour
- Black
