Deutsch
English
Français
Walterscheid® Coupling Clevis Type KU2000/886BFB – 8004286
KU2000 HD=193x80 mm
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Discontinued Model. Limited availability. Successor product please inquire by e-mail. Please use button "Questions about product" on the right.
As an alternative to this product, a complete conversion of the tractor can optionally be carried out with the quick adjustable support KU386 (order number: 8002458) or KU386KK (order number: 8002747). Suitable slide-in couplings and other accessories can be found with the respective quick adjustable support.
As an alternative to this product, a complete conversion of the tractor can optionally be carried out with the quick adjustable support KU386 (order number: 8002458) or KU386KK (order number: 8002747). Suitable slide-in couplings and other accessories can be found with the respective quick adjustable support.
The scope of delivery includes 1x coupling clevis type KU2000/886BFB with single homologation.
Suitable for towing eyes according to DIN 11026 (ISO 5692-2)/ DIN 11043/ DIN 74054 (ISO 8755)/ DIN 9678 (ISO 5692-1).
Instructions for certificates: Installation of coupling parts must be checked and approved by an recognized expert
according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Model
- KU2000/886BFB
- Type of connection
- automatic, coupling pin crowned
- Vertical load (daN)
- 1600
- D-Value (kN)
- 64,6
- Norm DIN/ISO
- DIN 11026 (ISO 5692-2) | DIN 11043 | DIN 74054 (ISO 8755) | DIN 9678 (ISO 5692-1)
- Single homologation
- Single homologation
- Approval
- Single homologation
- AP Code
- A-S-C-DC67-RC0-SH-0/35
- A (mm)
- 193
- B (mm)
- 80
- C (mm)
- 25
- D (mm)
- 67
- E (mm)
- 37
- AP-Code
- A-S-C-DC67-RC0-SH-0/35
- Data sheet
- 1.02.080
- Colour
- Black
