Walterscheid® Power Steering System 301-100-50 – 8004617

Product number: 8004617

100/50-2x21 mm


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Original Walterscheid accessories


Product advantages

Fitted for Walterscheid Easy Fit Steering System
The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
The scope of delivery includes 1x Power steering system 301-100-50.
Power steering system ZWL50 according to ISO 26402.

The presence of fixing points for the power steering adapter is provided on site.
The selection of themouning screws (quality 10.9) and the spacers must be made according to the selected power steering component.
Selection of power steering components depends on position of steering rod on the device.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Model
301-100-50
Norm DIN/ISO
ISO 26402
AP Code
N-SAH-CG1-NH-0
AP-Code
N-SAH-CG1-NH-0
Data sheet
6.04.010
Colour
Black

ass: 6 sim: 0 croo: 0