Deutsch
English
Français
Walterscheid® Hook Adapter Top Part HK350-Cat.3 – 8005677
HD=140x100/17-350 mm CAT3
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
The product is intended for mounting on a Walterscheid attachment system.
The scope of delivery includes 1x hook adapter HK350-Cat.3 and 2x clamping sleeve (order number: 8004781).
If required, an additional securing plate (order number: 8002921) must also be ordered for the reception of safety chain.
If required, an additional securing plate (order number: 8002921) must also be ordered for the reception of safety chain.
Length of fixing screws M16 ISO4014 (DIN931) Quality 10.9 is depending on thickness of the base body.
Instructions for certificates: Installation of coupling parts must be checked and approved by an recognized expert according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- Hook hitch
- Model
- HK350-Cat.3
- Flange dimension
- HD=140x100/17 mm
- Railsize
- W=350 mm
- Approval
- Single homologation
- AP Code
- N-SAV-ZP-MP-GE-SH-0
- A (mm)
- 140
- B (mm)
- 100
- C (mm)
- M16
- D (mm)
- 350
- E (mm)
- 134
- F (mm)
- 406
- G (mm)
- 49
- AP-Code
- N-SAV-ZP-MP-GE-SH-0
- J (mm)
- 390
- H (mm)
- 64
- I (mm)
- 210
- Data sheet
- 5.02.060
- Colour
- Black
