Deutsch
English
Français
Walterscheid® Stfromiliser body ASST-B - 1309021
STABILISATOR-GRUNDK ASST-B L350+-36 SA19,1-44
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Walterscheid Stabiliser ASST-B with mechanical body and dowel pin.
Product advantages
Safe transport
Stability on the hillside
No handling in the danger area behind or under the tractor when the device is attached
Safe lane keeping even in difficult terrain
Convenient coupling through simple adjustment of the spread
Low susceptibility to dirt
Reduction of wear on the three-point linkage
Product advantages
Safe transport
Stability on the hillside
No handling in the danger area behind or under the tractor when the device is attached
Safe lane keeping even in difficult terrain
Convenient coupling through simple adjustment of the spread
Low susceptibility to dirt
Reduction of wear on the three-point linkage
The scope of delivery includes the stabiliser body. All other attachments are not included in the scope of delivery and may have to be purchased separately.
Designed for mechanical lower links
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- B (mm)
- 44
- Manufacturer
- Walterscheid
- d (mm)
- 19,1
- L (mm)
- 350
- Suspension travel (mm)
- 36
- G (mm)
- M30
