Deutsch
English
Français
Walterscheid® Coupling Clevis Type Flange KU2000NA5-5 – 8004004
KU2000 HD=160x100/21 mm
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
This product is an automatic trailer coupling. With regard to the jaw dimensions and the area of use, it complies with DIN 11028, RREG 2009/144/EC, VO (EU) 2015/208, UN ECE R147 and class c40. In normal position is the coupling in closed and locked position. The coupling is designed with a lever trigger system, i.e. the coupling procedure is triggered by moving a trailer ring into the clevis and pressing back the trigger lever. Furthermore it has a cylindirical pin D=32 mm and can be privoted through 360°. The torque required for this purpose being 100 to 150 Nm. The range of application extends to the use on agricultural or forestry vehicles, self-propelled work machines or trailers.
Product advantages
Forged model
360 degree free turnable pin
Product advantages
Forged model
360 degree free turnable pin
The scope of delivery includes 1x coupling clevis type flange KU2000NA5-5.
Suitable for towing eyes according to DIN 11026 (ISO 5692-2)/ DIN 11043/ DIN 74054 (ISO 8755)/ DIN 74053 (ISO 1102)/ DIN 9678 (ISO 5692-1) and „Schweizer Zugöse“
German Approval No.: M 9619 | Approval No.: e1*2009/144*0533 | e1*2015/208*2016/1788 ND*00430
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- automatic, coupling pin cylindrical
- Model
- KU2000NA5-5
- Flange dimension
- HD=160x100/21 mm
- Vertical load (daN)
- 2000 | 2500 | 2800
- D-Value (kN)
- 89,2 | 100
- Norm DIN/ISO
- DIN 11026 (ISO 5692-2) | DIN 11043 | DIN 74053 (ISO 1102) | DIN 74054 (ISO 8755) | DIN 9678 (ISO 5692-1) | Schweizer Zugöse
- German approval no.
- M9619
- Approval
- e1 0533 I e1 00430
- AP Code
- A-F-G-RC0-DH-0
- A (mm)
- 160
- B (mm)
- 100
- C (mm)
- 21
- D (mm)
- 32
- AP-Code
- A-F-G-RC0-DH-0
- Data sheet
- 1.03.010
- Colour
- Black
