Deutsch
English
Français
Walterscheid® Quick adjustable support KU301XL
KU301 W=322/30/22 mm-8H
Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.
Discontinued Model. Limited availability. Successor product please inquire by e-mail. Please use button "Questions about product" on the right.
Product advantages
The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
Product advantages
The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
The scope of delivery includes 1x quick adjustable support KU301XL.
Adjustable support KU301XL is not usable together with insert of drawbar KBa8301ALX.
If necessary, mount the forced steering adapter (order number: 8004617) either on the right and/or left at the lower locking holes of the guide rail. The forced steering (order number: 8005408) is mounted on the adapter with screws (order number: 8004472).
If necessary, mount the forced steering adapter (order number: 8004617) either on the right and/or left at the lower locking holes of the guide rail. The forced steering (order number: 8005408) is mounted on the adapter with screws (order number: 8004472).
German Approval No.: M9872 | Approval No.: e1*89/173*0389
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type of connection
- modular
- Model
- KU301XL
- Number of locking positions
- 8
- Vertical load (daN)
- 2000
- Railsize
- W=322/30/22 mm
- D-Value (kN)
- 118,2
- German approval no.
- M9872
- Approval
- e1 0389
- AP Code
- L-OL0-VZP-DH-0/38/65/66/72
- A (mm)
- 322
- B (mm)
- 30
- C (mm)
- 22
- D1 (mm)
- 379
- D2 (mm)
- 147,5
- E1 (mm)
- 138
- E2 (mm)
- 160
- E3 (mm)
- 111,5
- E4 (mm)
- 63
- AP-Code
- L-OL0-VZP-DH-0/38/65/66/72
- Data sheet
- 3.01.020
- Colour
- Claas grey
